自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
自然科学版 英文版
英文版编委
自然科学版 英文版
英文版首届青年编委

您目前所在的位置:首页 - 期刊简介 - 详细页面

中南大学学报(自然科学版)

Journal of Central South University

第46卷    第7期    总第251期    2015年7月

[PDF全文下载]    [Flash在线阅读]

    

文章编号:1672-7207(2015)07-2558-06
斜腹板箱形截面的扭转几何特性
胡玉茹,刘亮,张元海

(兰州交通大学 土木工程学院,甘肃 兰州,730070)

摘 要: 根据薄壁箱梁约束扭转理论中的几何特性计算过程,推导斜腹板双室箱形截面的扭转中心、主扇性坐标及主扇性惯性矩的实用计算公式,数值算例验证所推导公式的正确性。以所推导的实用公式为基础,结合数值算例,详细分析斜腹板倾角、悬臂板宽度及梁高等参数变化对斜腹板双室箱形截面的扭转中心、主扇性坐标及主扇性惯性矩的影响规律。研究结果表明:扭转中心至顶板中面的距离随着斜腹板倾角的增大而增大,但该距离与梁高之比却随着梁高的增大而减小;随着悬臂板宽度的增大,悬臂板自由端处的主扇性坐标将显著增大;随着斜腹板倾角的增大,主扇性惯性矩具有先增大后减小的变化规律;当悬臂板宽度较大时,主扇性惯性矩随悬臂板宽度的增大而迅速增大,梁高较大时主扇性惯性矩的增大程度尤为显著。

 

关键词: 斜腹板箱形截面;几何特性;扭转中心;主扇性坐标;主扇性惯性矩

Torsional geometrical properties of box section with inclined webs
HU Yuru, LIU Liang, ZHANG Yuanhai

School of Civil Engineering, Lanzhou Jiaotong University, Lanzhou 730070, China

Abstract:According to the calculation procedure for the geometrical properties in the restrained torsion theory of thin-walled box girders, the practical formulas for the twist centre, principal sector coordinate and principal sector moment of inertia of a double-cell box section with inclined webs were derived. Numerical examples validated the correctness of the formulas. Based on the practical formulas derived, the influences of the variations of the web-inclined angle, cantilever plate width and beam depth on the twist centre, principal sector coordinate and principal sector moment of inertia of the double-cell box section with inclined webs were numerically analyzed in detail. The results show that the distance from the twist centre to the middle surface of the top plate increases with the increase of the web-inclined angle; however, the ratio of the distance to the beam depth decreases with the increase of the beam depth. The principal sector coordinate at the tip end of the cantilever plate increases significantly with the increase of the cantilever plate width. The principal sector moment of inertia increases firstly and then decreases with the increase of the web-inclined angle. The principal sector moment of inertia increases rapidly with the increase of the cantilever plate width when the plate width is relatively large; moreover, the increase degree is especially significant for relative large beam depth.

 

Key words: box section with inclined webs; geometrical properties; twist centre; principal sector coordinate; principal sector moment of inertia

中南大学学报(自然科学版)
  ISSN 1672-7207
CN 43-1426/N
ZDXZAC
中南大学学报(英文版)
  ISSN 2095-2899
CN 43-1516/TB
JCSTFT
版权所有:《中南大学学报(自然科学版、英文版)》编辑部
地 址:湖南省长沙市中南大学 邮编: 410083
电 话: 0731-88879765(中) 88836963(英) 传真: 0731-88877727
电子邮箱:zngdxb@csu.edu.cn 湘ICP备09001153号