Wear map for sliding wear behavior of Cu-15Ni-8Sn alloy against bearing steel under oil-lubricated condition |
CHENG Jin-juan(成金娟), GAN Xue-ping(甘雪萍), LI Zhou(李周), LEI Qian(雷前), ZHOU Ke-chao(周科朝) |
311 |
Influence of long-term isothermal aging on microstructure and creep rupture properties of Ni-base superalloy M4706 |
DUAN Yu-hao(段宇浩), ZHANG Peng(张鹏), LI Jiao(李娇), LI Bo(李波), SONG Xiao-long(宋小龙), GONG Xiu-fang(巩秀芳), YANG Gong-xian(杨功显) |
325 |
Microstructure and tensile property of SLM 316L stainless steel manufactured with fine and coarse powder mixtures |
YANG Xin(杨鑫), REN Yao-jia(任垚嘉), LIU Shi-feng(刘世锋), WANG Qing-juan(王庆娟), SHI Ming-jun(时明军) |
334 |
Fe/N-doped mesoporous carbons derived from soybeans:A highly efficient and low-cost non-precious metal catalyst for ORR |
WU Qiu-mei(伍秋美), DENG Da-kuan(邓大款), HE Yi-lun(何轶伦), ZHOU Zhong-cheng(周忠诚), SANG Shang-bin(桑商斌), ZHOU Zhi-hua(周智华) |
344 |
Influence of abrasive hardness on erosion wear of abrasive air jets |
LIU Yong(刘勇), CHEN Chang-jiang(陈长江), WEI Jian-ping(魏建平), LIU Xiao-tian(刘笑天), WANG Xiang-dong(王向东) |
356 |
Simulation and experimental study of 7A09 aluminum alloy milling under double liquid quenching |
LUO Heng(罗恒), WANG You-qiang(王优强), ZHANG Ping(张平) |
372 |
Microstructure and hot corrosion behavior of Al-Ce-Y coatings on DZ125 nickel-based alloy prepared by pack cementation process |
LI Yong-quan(李涌泉), LI Ji-lin(李吉林), QIN Chun(秦春), JIANG Liang(蒋亮), GENG Gui-hong(耿桂宏) |
381 |
A novel adsorbent of three-dimensional ordered macro/mesoporous carbon for removal of malachite green dye |
WAGN Jie(王杰), HOU Guang-ya(侯广亚), WU Lian-kui(伍廉奎), CAO Hua-zhen(曹华珍), ZHENG Guo-qu(郑国渠), TANG Yi-ping(唐谊平) |
388 |
Damping controller design based on FO-PID-EMA in VSC HVDC system to improve stability of hybrid power system |
Nima SHAFAGHATIAN, Arvin KIANI, Naser TAHERI, Zahra RAHIMKHANI, Seyyed Saeed MASOUMI |
403 |
A novel robust fixed time synchronization of complex network subject to input nonlinearity in the presence of uncertainties and external disturbances |
Mehrdad SHIRKAVAND, Mohammad Reza SOLTANPOUR |
418 |
Cooperative task allocation for heterogeneous multi-UAV using multi-objective optimization algorithm |
WANG Jian-feng(王建峰), JIA Gao-wei(贾高伟), LIN Jun-can(林君灿), HOU Zhong-xi(侯中喜) |
432 |
CTCPPre: A prediction method for accepted pull requests in GitHub |
JIANG Jing(蒋竞), ZHENG Jia-teng(郑嘉腾), YANG Yun(杨云), ZHANG Li(张莉) |
449 |
Process control technology of low NOx sintering based on coke pretreatment |
WANG Zhao-cai(王兆才), ZHOU Zhi-an(周志安), GAN Min(甘敏), FAN Xiao-hui(范晓慧), HE Guo-qiang(何国强) |
469 |
Effect of moving baffle on average velocity and mixing of binary particles in rotating drums |
ZHANG Li-dong(张立栋), MA Jie(马杰), WANG Zhi-chao(王智超), QIN Hong(秦宏), BAI Jing-ru(柏静儒), WANG Qing(王擎) |
478 |
Multi-component opportunistic maintenance optimization for wind turbines with consideration of seasonal factor |
SU Chun(苏春), HU Zhao-yong(胡照勇), LIU Yang(刘洋) |
490 |
A hybrid approach for evaluating CPT-based seismic soil liquefaction potential using Bayesian belief networks |
MAHMOOD Ahmad, TANG Xiao-wei(唐小微), QIU Jiang-nan(裘江南), GU Wen-jing(谷文静), FEEZAN Ahmad |
500 |
Risk assessment of water inrush in tunnels based on attribute interval recognition theory |
WANG Sheng(王升), LI Li-ping(李利平), CHENG Shuai(成帅), HU Hui-jiang(胡慧江), ZHANG Ming-guang(张明光), WEN Tao(文桃) |
517 |
Water invasion and remaining gas distribution in carbonate gas reservoirs using core displacement and NMR |
GUO Cheng-fei(郭程飞), LI Hua-bin(李华斌), TAO Ye(陶冶), LANG Li-yuan(郎丽媛), NIU Zhong-xiao(牛忠晓) |
531 |
Bearing characteristics and fatigue damage mechanism of multi-pillar system subjected to different cyclic loads |
ZHOU Zi-long(周子龙), WANG Hai-quan(王海泉), CAI Xin(蔡鑫), ZANG Hai-zhi(臧海智), CHEN Lu(陈璐), LIU Fu(刘富) |
542 |
Freeze-thaw damage mechanism of elastic modulus of soil-rock mixtures at different confining pressures |
ZHOU Zhong(周中), LIU Zhuang-zhuang(刘撞撞), YANG Hao(杨豪), GAO Wen-yuan(高文渊), ZHANG Cheng-cheng(张称呈) |
554 |
Controlling deflection of long steel I-shaped girder bridge using two V-shaped pre-tensioning cables |
Fatemeh PARTOVI, Nader FANAIE |
566 |
A power function model for simulating creep mechanical properties of salt rock |
LI Huan(李欢), Ngaha Tiedeu WILLIAM, Jaak DAEMEN, ZHOU Jun(周俊), MA Chang-kun(马昌坤) |
578 |
Effects of axial static stress on stress wave propagation in rock considering porosity compaction and damage evolution |
JIN Jie-fang(金解放), YUAN Wei(袁伟), WU Yue(吴越), GUO Zhong-qun(郭钟群) |
592 |
Proposal and analysis of a coupled power generation system for natural gas pressure reduction stations |
LI Cheng-hao(李铖灏), ZHENG Si-yang(郑思洋), CHEN Xing-yu(陈星宇), LI Jie(李洁), ZENG Zhi-yong(曾志勇) |
608 |
Crashworthiness of innovative hexagonal honeycomb-like structures subjected to out-of-plane compression |
WANG Zhong-gang(王中钢), SHI Chong(施冲), DING San-san(丁叁叁), LIANG Xi-feng(梁习锋) |
621 |