| Failure simulation in resistance spot-welded lap-joints using cohesive zone modeling |
Mohammad Ali Saeimi SADIGH, Gholamreza MARAMI, Bahman PAYGOZAR |
2567 |
| Development and characterization of hot dip aluminide coated stainless steel 316L |
Sehrish MUKHTAR, Waqas ASGHAR, Zubair BUTT, Zaheer ABBAS, Mudaser ULLAH, Rana ATTA-UR-REHMAN |
2578 |
| Effect of working parameters on performance characteristics of hydrostatic turntable by using FSI-thermal model |
HU Jun-ping(胡均平), LIU Cheng-pei(刘成沛) |
2589 |
| Particle deposition in ventilation duct with convex or concave wall cavity |
WANG Fei-fei(王飞飞), ZHANG En-shi(张恩实), XU Xin-hua(徐新华), WANG Jin-bo(王劲柏), MI Jian-chun(米建春) |
2601 |
| Robust control with compensation of adaptive model for dual-stage inertially stabilized platform |
SONG Jiang-peng(宋江鹏), ZHOU Di(周荻), SUN Guang-li(孙广利), QI Zhi-hui(祁智辉) |
2615 |
| Bidirectional secondary transmissions with energy harvesting in cognitive wireless sensor networks |
TANG Kun(唐锟), SHI Rong-hua(施荣华), ZHANG Ming-ying(张明英), SHI He-yuan(施鹤远), LEI Wen-tai(雷文太) |
2626 |
| Dynamic model for internally carried air-launched rocket |
ZHENG Wu-ji(郑无计), ZHANG Deng-cheng(张登成) |
2641 |
| Adaptive neural network based sliding mode altitude control for a quadrotor UAV |
Hadi RAZMI |
2654 |
| Path planning for UAVs formation reconfiguration based on Dubins trajectory |
CHEN Qing-yang(陈清阳), LU Ya-fei(鲁亚飞), JIA Gao-wei(贾高伟), LI Yue(李樾), ZHU Bing-jie(朱炳杰), LIN Jun-can(林君灿) |
2664 |
| Numerical study on cavitation in a globe control valve with different numbers of anti-cavitation trims |
Hamidreza YAGHOUBI, Seyed Amir Hossein MADANI, Mansour ALIZADEH |
2677 |
| Dynamic probabilistic design technique for multi-component system with multi-failure modes |
ZHANG Chun-yi(张春宜), LU Cheng(路成), FEI Cheng-wei(费成巍), JING Hui-zhe(井慧哲), LI Cheng-wei(李成伟) |
2688 |
| Melting heat transfer with radiative effects and homogeneous– heterogeneous reaction in thermally stratified stagnation flow embedded in porous medium |
M. JAVED, M. FAROOQ, S. AHMAD, Aisha ANJUM |
2701 |
| Hydraulic bulging process with axial feedings and strain field of U-shaped metal bellows |
HAO Zeng-liang(郝增亮), XI Chen-yang(郗晨阳), HUANG Zhi-heng(黄志恒), ZHANG Chun-xiang(张春祥), LUO Jun-ting(骆俊廷) |
2712 |
| Analysis on vertical steering vibration of drum shearer cutting part |
YANG Dao-long(杨道龙), LI Jian-ping(李建平), WANG Yan-xiang(王雁翔), JIANG Hong-xiang(江红祥) |
2722 |
| Noise comparison of centrifugal pump operating in pump and turbine mode |
DONG Liang(董亮), DAI Cui(代翠), LIN Hai-bo(林海波), CHEN Yi-ping(陈怡平) |
2733 |
| Intelligent prediction on performance of high-temperature heat pump systems using different refrigerants |
YU Xiao-hui(于晓慧), ZHANG Yu-feng(张于峰), ZHANG Yan(张彦), HE Zhong-lu(贺中禄),DONG Sheng-ming(董胜明), MA Xue-lian(马学莲), YAO Sheng(姚胜) |
2754 |
| Characterization and formation mechanisms of fractures and their significance to hydrocarbon accumulation: A case study of Lower Ordovician mid-assemblage Formations in central Ordos Basin, China |
ZHAOZi-long(赵子龙), ZHAO Jing-zhou(赵靖舟), REN Hai-jiao(任海姣), LI Jun(李军), WU Wei-tao(吴伟涛) |
2766 |
| Reservoir characteristics and hydrocarbon accumulation of Carboniferous volcanic weathered crust of Zhongguai high area in the western Junggar Basin, China |
LI Hu(李虎), TANG Hong-ming(唐洪明), QIN Qi-rong(秦启荣), FAN Cun-hui(范存辉),HAN Song(韩嵩), YANG Cang(杨仓), ZHONG Cheng(钟城) |
2785 |
| Variation analysis of ultimate pullout capacity of shallow horizontal strip anchor plate with 2-layer overlying soil based on nonlinear M-C failure criterion |
ZHAO Lian-heng(赵炼恒), TAN Yi-gao(谭亦高), NIE Zhi-hong(聂志红), YANG Xin-ping(杨新平), HU Shi-hong(胡世红) |
2802 |
| Influence of temperature on swelling deformation characteristic of compacted GMZ bentonite-sand mixtures |
CUI Su-li(崔素丽), DU Yan-feng(杜延峰), WANG Xue-pan(王学攀), HUANG Sen(黄森), XIE Wan-li(谢婉丽) |
2819 |
| Influence of enlarged section parameters on pressure transients of high-speed train passing through a tunnel |
WANG Tian-tian(王田天), LEE Chun-hian(李椿萱), YANG Ming-zhi(杨明智) |
2831 |
